NetSpot

Licence: Freeware
Version 2.1 | Release Date: 2013-05-27 | Download

Vendors' database updated
Fixed the app's consistency check error that prevented running NetSpot from non-default locations
Projects with high-res maps could lose samples' coordinates

Version 2.0 | Release Date: 2012-10-18 | Download

Sampling Point Deletion: Any data point may now be deleted at any point during the scan. No starting over if you place a point in the wrong spot!

Streamlined User Interface: Refreshed and sleek, the new interface simplifies the site survey process and improves your workflow.

Wireless Discover Mode: Allows you to quickly identify surrounding Wi-Fi networks and analyze them — without needing to run a full survey.

Manual Re-location of APs: If the location of an AP isn’t quite right, it can now be moved with just a click.

Troubleshooting Advice: Our knowledgebase now provides advice on how to solve six of the most common Wi-Fi network issues: low signal strength, high noise levels, issues with SNR, issues with SIR, low upload rates, and low download rates.

[PRO] Active Scanning: Gives you the ability to measure actual Internet speed in your survey area. Upload and download speeds, as well as wireless transmit rates are recorded.

[PRO] Active Scanning Visualizations: Upload Speed, Download Speed and Wireless Transmit Rate heat maps are available for active scans.

[PRO] Automated Troubleshooting Visualizations: Six special troubleshooting visualizations highlight areas of potential problems and provide you with recommendations on how to improve them.

[PRO] Multi-Floor Scanning: Allows smart multi-floor placement of discovered APs. APs from other floors will be shown as ghosts on the map.

[PRO] Zone Snapshots: Easily duplicate zones, so you don’t need to configure new zones every time you relocate your hotspots or make changes to the environment.

[PRO] Advanced Network Grouping: Easily group networks by band, channel, vendor, or security type – or set up your own custom groups.
[PRO] Hidden Network Scanning: Finally, networks that don’t broadcast their SSIDs can also be scanned.

[PRO] Autosave: Don’t worry about losing your data with automatic project saving every 1, 5 or 30 minutes.

[PRO] Custom Aliases: Now you can assign custom aliases to your APs to better manage your hotspots.

[PRO] Environment-Based Project Presets: For users scanning large areas, these presets will customize the prediction sampling radius, allowing a greater distance between sampling points.

Version 2.0 | Release Date: 2012-10-18 | Download

Sampling Point Deletion: Any data point may now be deleted at any point during the scan. No starting over if you place a point in the wrong spot!

Streamlined User Interface: Refreshed and sleek, the new interface simplifies the site survey process and improves your workflow.

Wireless Discover Mode: Allows you to quickly identify surrounding Wi-Fi networks and analyze them — without needing to run a full survey.

Manual Re-location of APs: If the location of an AP isn’t quite right, it can now be moved with just a click.

Troubleshooting Advice: Our knowledgebase now provides advice on how to solve six of the most common Wi-Fi network issues: low signal strength, high noise levels, issues with SNR, issues with SIR, low upload rates, and low download rates.

[PRO] Active Scanning: Gives you the ability to measure actual Internet speed in your survey area. Upload and download speeds, as well as wireless transmit rates are recorded.

[PRO] Active Scanning Visualizations: Upload Speed, Download Speed and Wireless Transmit Rate heat maps are available for active scans.

[PRO] Automated Troubleshooting Visualizations: Six special troubleshooting visualizations highlight areas of potential problems and provide you with recommendations on how to improve them.

[PRO] Multi-Floor Scanning: Allows smart multi-floor placement of discovered APs. APs from other floors will be shown as ghosts on the map.

[PRO] Zone Snapshots: Easily duplicate zones, so you don’t need to configure new zones every time you relocate your hotspots or make changes to the environment.

[PRO] Advanced Network Grouping: Easily group networks by band, channel, vendor, or security type – or set up your own custom groups.
[PRO] Hidden Network Scanning: Finally, networks that don’t broadcast their SSIDs can also be scanned.

[PRO] Autosave: Don’t worry about losing your data with automatic project saving every 1, 5 or 30 minutes.

[PRO] Custom Aliases: Now you can assign custom aliases to your APs to better manage your hotspots.

[PRO] Environment-Based Project Presets: For users scanning large areas, these presets will customize the prediction sampling radius, allowing a greater distance between sampling points.

Version 1.0 | Release Date: 2011-08-08 | Download
No changes specified